« Вернуться к результатам поиска

Instrumentation & Control Commissioning Fire and Gas Technician - вакансия 251895

Дата обновления: 16.06.2020

Город: Атырау

Тип занятости: Постоянная



Текст вакансии:

Instrumentation & Control Commissioning Fire and Gas Technician

Tengiz 28/28

Duties:

  • Perform Pre -Commissioning and Commissioning of Fire and Gas Detection System by utilizing Honeywell experion DCS system in Utilities and Process Area. Also Skilled in Fire and Gas instrument installation, Trouble Shooting and Wiring. The work needs to be carried out by the plant Permit to work system, PPHA and JSA.
  • Confirm correct Zoning and indications on Graphics, Mimic panel, Local fire alarm panel, Main FGS alarm Panel matches with the field value.Calibration/warming up of detectors by using Cal Gas bottles.
  • Loop checking of FGS instruments Detectors like H2S(Hydrogen Sulfide),LEL Detectors(Low Explosive Limit),H2 Detectors(Hydrogen Detectors),O2(Oxygen Deficiency Detectors), IR Fire/Gas detectors, Open Path Gas Detectors(Line Of Sight detectors), Smoke and Heat detectors, Manual Call stations, Flame Detectors, Alarm sounder and Beacons and fire dampers with digital input/output.Involving in Deluge System commissioning , FM-200 commissioning and F&G addressable Systems
  • Carries out systematic function test, calibration and repair of various types of combustible gas detectors, toxic gas detectors, flame detectors, smoke detectors, horns, beacons, speakers, F&G controllers, deluge systems and informs any serious abnormalities as observed to Leads for his advice and direction.
  • For the safe operation of devices. Clean system cabinets, Junction Boxes and carryout proper housekeeping before and after the job
  • Ensuring that the integrity of the Fire & Gas systems and all safe working within the procedures.
  • ‘Redline’ of relevant documents in accordance with project procedure
  • Coordinate with Vendors in accordance with commissioning schedule
  • The F&G technician shall wok in accordance with strict system guidelines, established procedures, standard practices, brief notes or detailed instructions.
  • Documenting inspection, testing, repair and failure data within the company adopted database system
  • Use and care for tools and equipment employed to perform calibration, testing and repair
  • Read and interpret F&G detection system drawings and various codes
  • Depends on the project requirements F&G Technician needs to carry out Loop checking, Troubleshooting and Function Testing of various PCS/SIS Instruments (Level, Temperature, Pressure, Flow, Control Valves, Shutdown Valves … etc.)
  • Loop checking of Inter-trip signals from F&G, SIS and PCS systems
  • Perform Pre -Commissioning and Commissioning of Fire and Gas Detection System by utilizing Honeywell experion DCS system in Utilities and Process Area. Also Skilled in Fire and Gas instrument installation, Trouble Shooting and Wiring. The work needs to be carried out by the plant Permit to work system, PPHA and JSA.
  • Confirm correct Zoning and indications on Graphics, Mimic panel, Local fire alarm panel, Main FGS alarm Panel matches with the field value.Calibration/warming up of detectors by using Cal Gas bottles.
  • Loop checking of FGS instruments Detectors like H2S(Hydrogen Sulfide),LEL Detectors(Low Explosive Limit),H2 Detectors(Hydrogen Detectors),O2(Oxygen Deficiency Detectors), IR Fire/Gas detectors, Open Path Gas Detectors(Line Of Sight detectors), Smoke and Heat detectors, Manual Call stations, Flame Detectors, Alarm sounder and Beacons and fire dampers with digital input/output.Involving in Deluge System commissioning , FM-200 commissioning and F&G addressable Systems
  • Carries out systematic function test, calibration and repair of various types of combustible gas detectors, toxic gas detectors, flame detectors, smoke detectors, horns, beacons, speakers, F&G controllers, deluge systems and informs any serious abnormalities as observed to Leads for his advice and direction.
  • For the safe operation of devices. Clean system cabinets, Junction Boxes and carryout proper housekeeping before and after the job
  • Ensuring that the integrity of the Fire & Gas systems and all safe working within the procedures.
  • ‘Redline’ of relevant documents in accordance with project procedure
  • Coordinate with Vendors in accordance with commissioning schedule
  • The F&G technician shall wok in accordance with strict system guidelines, established procedures, standard practices, brief notes or detailed instructions.
  • Documenting inspection, testing, repair and failure data within the company adopted database system
  • Use and care for tools and equipment employed to perform calibration, testing and repair
  • Read and interpret F&G detection system drawings and various codes
  • Depends on the project requirements F&G Technician needs to carry out Loop checking, Troubleshooting and Function Testing of various PCS/SIS Instruments (Level, Temperature, Pressure, Flow, Control Valves, Shutdown Valves … etc.)
  • Loop checking of Inter-trip signals from F&G, SIS and PCS systems
  • Perform Pre -Commissioning and Commissioning of Fire and Gas Detection System by utilizing Honeywell experion DCS system in Utilities and Process Area. Also Skilled in Fire and Gas instrument installation, Trouble Shooting and Wiring. The work needs to be carried out by the plant Permit to work system, PPHA and JSA.
  • Confirm correct Zoning and indications on Graphics, Mimic panel, Local fire alarm panel, Main FGS alarm Panel matches with the field value.Calibration/warming up of detectors by using Cal Gas bottles.
  • Loop checking of FGS instruments Detectors like H2S(Hydrogen Sulfide),LEL Detectors(Low Explosive Limit),H2 Detectors(Hydrogen Detectors),O2(Oxygen Deficiency Detectors), IR Fire/Gas detectors, Open Path Gas Detectors(Line Of Sight detectors), Smoke and Heat detectors, Manual Call stations, Flame Detectors, Alarm sounder and Beacons and fire dampers with digital input/output.Involving in Deluge System commissioning , FM-200 commissioning and F&G addressable Systems
  • Carries out systematic function test, calibration and repair of various types of combustible gas detectors, toxic gas detectors, flame detectors, smoke detectors, horns, beacons, speakers, F&G controllers, deluge systems and informs any serious abnormalities as observed to Leads for his advice and direction.
  • For the safe operation of devices. Clean system cabinets, Junction Boxes and carryout proper housekeeping before and after the job
  • Ensuring that the integrity of the Fire & Gas systems and all safe working within the procedures.
  • ‘Redline’ of relevant documents in accordance with project procedure
  • Coordinate with Vendors in accordance with commissioning schedule
  • The F&G technician shall wok in accordance with strict system guidelines, established procedures, standard practices, brief notes or detailed instructions.
  • Documenting inspection, testing, repair and failure data within the company adopted database system
  • Use and care for tools and equipment employed to perform calibration, testing and repair
  • Read and interpret F&G detection system drawings and various codes
  • Depends on the project requirements F&G Technician needs to carry out Loop checking, Troubleshooting and Function Testing of various PCS/SIS Instruments (Level, Temperature, Pressure, Flow, Control Valves, Shutdown Valves … etc.)
  • Loop checking of Inter-trip signals from F&G, SIS and PCS systems requirements

Requirements:

- Proven strong technical skills in discipline subject matter.

- Good working knowledge of test equipment at hands on level.

- Good working knowledge of process plant instrumentation at hands on level.

- Good working knowledge of fire & gas devices.

- Good working knowledge of E-house commissioning inclusive of, MCC commissioning.

- Preferred: Hands on DCS knowledge at a loop check level

- Preferred: Hands on PLC knowledge at a loop check level

- Diploma / Trade Certificate in Instrumentation & Control Engineering from a Technical School or University



Контактные данные:

Откликнуться